Athana International

TAPE MASTER
COMPUTER- CONTROLLED
CERTIFIER

8MM
4MM
- INCH

DESCRIPTION:

The Athana TapeMaster is a complete computer-controlled system for testing and evaluating 8mm, 4mm and 1 /4-inch tape cassettes and cartridges.

The TapeMaster is an all-purpose "Go/No Go" certifier that writes a bit pattern on the tape and reads the pattern back. If the bit pattern is successfully read, the tape is passed; if the bit pattern cannot be read, the tape is failed, at the point on the tape where the data cannot be read.

The operator determines how much of the tape is to be tested. As little as one megabyte can be tested, or as much as five gigabytes.

The TapeMaster has been designed with special software and firmware to identify every read failure. The SCSI interface makes it possible for it to be used with all 8mm, 4mm and 1/4-inch drives designed for the SCSI interface.


8mm CERTIFIER C-8
CERTIFIER SYSTEM INCLUDES:
  • PC Computer based system
  • Athana 8mm 2.3 gigabyte tape drive**
  • Athana 16 mb SCSI controller board*
  • Power cord
  • Athana software program
  • 15" SVGA Monitor

 

4mm CERTIFIER C-4
THIS SYSTEM INCLUDES:
  • PC Computer based system
  • Athana 4mm 4.0 gigabyte tape drive**
  • Athana 16 mb SCSI controller board*
  • Athana software program
  • 15" SVGA Monitor

 

- INCH CERTIFIER C-8000
THIS SYSTEM INCLUDES:
  • PC Computer based system
  • Athana 525 megabyte tape drive**
  • Athana 16 mb SCSI controller board*
  • Athana software program
  • 15" SVGA Monitor

 

OPERATING SPECIFICATIONS
  • Speed:
Tape Drive write speed
  • Dimensions:
Standard PC system
  • Weight:
Approx. 47 Ibs. (21.4 kg)
  • Power:
115 VAC, 60 Hz, 2A
230 VAC, 50 Hz, 1A

 

 


 

Return to Top

Return to Main Page